MRTG¶
The Multi Router Traffic Grapher will allow you to generate nice
graphs of the data available via SNMP.
This can be system information like uptime, interface information and
statistics, and more.
For more info see the MRTG site.
Here an example on the graph you can generate:
MRTG lan interface daily graph
Installing MRTG¶
I installed MRTG on a Win7 pc. For this I followed the Windows Installation Guide.
I also installed MGTG as a service.
MRTG Config file¶
You can generate a initial config file with the cfgmaker tool.
This will query the snmp agent, and from the obtained info a config
file is created:
perl cfgmaker public@192.168.178.1 —global „WorkDir: c:wwwmrtg“ —output mrtg.cfg
But be aware that I have noticed that interface index numbering
changes often at reboot, or when router parameters are changed.
For the wifi interfaces ‚wifi0‘ and ‚ath0‘ of the 7270v3 I have even
seen multiple interface indexes were created where only the last
created with actual counters. A restart of the snmpd will correct
this.
In the generated config file most, if not all, are commented out due
to e.g. if there is no speed information found. Start with remove the
comments character for one interface, and get this to work.
After you have cleared all possible config errors (e.g. watch leading
spaces which seems not accepted at some locations), you can add more
interfaces.
You can also change the ADSL related interfaces to have two speeds
(asymmetric) so the percentage of used link speed for up and down is
more realistic.
Here my current config for the 7270v3: I added config for monitoring
CPU load (1, 5, and 15 minutes average), CPU Usage, and Memory usages.
This to help with trouble shooting performance issues.
A good explanation of how to interpret the CPU load values can be
found
here.
# Created by
# cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg.cfg
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
WorkDir: c:\Users\<user>\www\mrtg
RunAsDaemon: yes
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System: fritz.fonwlan.box
# Description: Linux fritz.fonwlan.box 2.6.19.2 #1 Fri Apr 8 14:13:30 CEST 2011 mips
# Contact: root@localhost
# Location: Unknown
######################################################################
## Interface 1 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1:
SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0"
MaxBytes[192.168.178.1_cpmac0]: 12500000
Title[192.168.178.1_cpmac0]: Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch
PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>cpmac0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 2 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * it is a Software Loopback interface
Target[192.168.178.1_lo]: \lo:public@192.168.178.1:
SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
MaxBytes[192.168.178.1_lo]: 1250000
Title[192.168.178.1_lo]: Traffic Analysis for 2 -- lo Local Loopback Interface
PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 2 -- lo Local Loopback Interface</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lo </td>
</tr>
<tr>
<td>ifType:</td>
<td>softwareLoopback (24)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1250.0 kBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>127.0.0.1 (localhost)</td>
</tr>
</table>
</div>
### Interface 3 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has no ifSpeed property
#
# Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1:
# SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0"
# MaxBytes[192.168.178.1_sit0]: 0
# Title[192.168.178.1_sit0]: Traffic Analysis for 3 -- sit0
# PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 3 -- sit0</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>fritz.fonwlan.box in Unknown</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>root@localhost</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>sit0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>Encapsulation Interface (131)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>No Name</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>
## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1:
SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0"
MaxBytes[192.168.178.1_eth0]: 12500000
Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0
PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>eth0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 6 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_lan]: \lan:public@192.168.178.1:
SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan"
MaxBytes[192.168.178.1_lan]: 12500000
Title[192.168.178.1_lan]: Traffic Analysis for 6 -- lan (eth + wifi)
PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 6 -- lan (eth + wifi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lan </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>169.254.1.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 7 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest]: \guest:public@192.168.178.1:
SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest"
MaxBytes[192.168.178.1_guest]: 6750000
Title[192.168.178.1_guest]: Traffic Analysis for 7 -- guest (Guest WiFi)
PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 7 -- guest (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.179.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 22 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1:
SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0"
MaxBytes[192.168.178.1_wifi0]: 6750000
Title[192.168.178.1_wifi0]: Traffic Analysis for 22 -- wifi0
PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 22 -- wifi0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1:
SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0"
MaxBytes[192.168.178.1_ath0]: 6750000
Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0
PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 30 >> Descr: 'guest1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest1]: \guest1:public@192.168.178.1:
SetEnv[192.168.178.1_guest1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="guest1"
MaxBytes[192.168.178.1_guest1]: 6750000
Title[192.168.178.1_guest1]: Traffic Analysis for 30 -- guest1 (Guest WiFi)
PageTop[192.168.178.1_guest1]: <h1>Traffic Analysis for 30 -- guest1 (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
### * has no ifSpeed property
Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1:
SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl"
MaxBytes1[192.168.178.1_dsl]: 1500000
MaxBytes2[192.168.178.1_dsl]: 128000
Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl
PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>dsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>ppp (23)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1:
SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl"
MaxBytes1[192.168.178.1_adsl]: 1500000
MaxBytes2[192.168.178.1_adsl]: 128000
Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm
PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>adsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>atm (37)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1:
SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs"
MaxBytes1[192.168.178.1_sixxs]: 1500000
MaxBytes2[192.168.178.1_sixxs]: 128000
Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs
PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>sixxs </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
# Router CPU one minute load averages
Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1:
RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.1]: 1000
Title[cpu.1]: CPU LOAD
PageTop[cpu.1]: <H1>CPU one minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>One minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.1]: avg cpu/min
Factor[cpu.1]: 0.01
YLegend[cpu.1]: CPU Utilization
Legend1[cpu.1]: CPU Utilization (Load)
Legend2[cpu.1]: CPU Utilization (Load)
Legend3[cpu.1]:
Legend4[cpu.1]:
LegendI[cpu.1]:
LegendO[cpu.1]: Usage
Options[cpu.1]: gauge, unknaszero
# Router CPU five minute load averages
Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1:
RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1:
MaxBytes[cpu.2]: 1000
Title[cpu.2]: CPU LOAD
PageTop[cpu.2]: <H1>CPU five minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Five minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.2]: avg cpu/5 min
Factor[cpu.2]: 0.01
YLegend[cpu.2]: CPU Utilization
Legend1[cpu.2]: CPU Utilization (Load)
Legend2[cpu.2]: CPU Utilization (Load)
Legend3[cpu.2]:
Legend4[cpu.2]:
LegendI[cpu.2]:
LegendO[cpu.2]: Usage
Options[cpu.2]: gauge, unknaszero
# Router CPU fifteen minute load averages
Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1:
RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.3]: 1000
Title[cpu.3]: CPU LOAD
PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Fifteen minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.3]: avg cpu/15 min
Factor[cpu.3]: 0.01
YLegend[cpu.3]: CPU Utilization
Legend1[cpu.3]: CPU Utilization (Load)
Legend2[cpu.3]: CPU Utilization (Load)
Legend3[cpu.3]:
Legend4[cpu.3]:
LegendI[cpu.3]:
LegendO[cpu.3]: Usage
Options[cpu.3]: gauge, unknaszero
# Router CPU Utilization ssCpuIdle.0
Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1:
RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.idle]: 1000
Title[cpu.idle]: CPU Utilization
PageTop[cpu.idle]: <H1>CPU Utilization</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>CPU Utilization</td>
</tr>
</table>
</div>
ShortLegend[cpu.idle]: %
YLegend[cpu.idle]: CPU Utilization
Legend1[cpu.idle]: CPU Utilization %(Load)
Legend2[cpu.idle]: CPU Utilization %(Load)
Legend3[cpu.idle]:
Legend4[cpu.idle]:
LegendI[cpu.idle]:
LegendO[cpu.idle]: Usage
Options[cpu.idle]: gauge, unknaszero
# Router Used Memory = Memory - Free Memory
# The total memory can be obtained from /proc/meminfo
# For the 7390 the MemTotal = 109168 kB
# For the 7270v3 the MemTotal = 59716 kB
Target[mem.used]: 59716 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1:
RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1:
MaxBytes[mem.used]: 59716
Title[mem.used]: Used Memory
PageTop[mem.used]: <H1>Used Memory</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Used Memory</td>
</tr>
</table>
</div>
ShortLegend[mem.used]: kBytes
YLegend[mem.used]: Used Memory
Legend1[mem.used]: Used Memory (Total is 59716)
Legend2[mem.used]: Used Memory (Total is 59716)
Legend3[mem.used]:
Legend4[mem.used]:
LegendI[mem.used]:
LegendO[mem.used]: Usage
Options[mem.used]: gauge, unknaszero
WorkDir: c:\Users\<user>\www\mrtg
For the 7390 I have the following config (not so much different).
# Created by
# cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg_7390.cfg
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
WorkDir: c:\Users\<user>\www\mrtg
RunAsDaemon: yes
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System: fritz.fonwlan.box
# Description: Linux fritz.fonwlan.box 2.6.28.10 #1 Thu Mar 21 15:33:40 CET 2013 mips
# Contact: root@localhost
# Location: Unknown
######################################################################
## Changes to use RRDTool as explained in: http://oss.oetiker.ch/mrtg/doc/mrtg-rrd.en.html
# LogFormat: rrdtool
# PathAdd: c:\rrdtool\rrdtool-1.4.7\win32\Debug
# LibAdd: c:\rrdtool\rrdtool-1.4.7\bindings\perl-shared
## Interface 1 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * it is a Software Loopback interface
Target[192.168.178.1_lo]: \lo:public@192.168.178.1:
SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
MaxBytes[192.168.178.1_lo]: 1250000
Title[192.168.178.1_lo]: Traffic Analysis for 1 -- lo Local Loopback Interface
PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 1 -- lo Local Loopback Interface</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lo </td>
</tr>
<tr>
<td>ifType:</td>
<td>softwareLoopback (24)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1250.0 kBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>127.0.0.1 (localhost)</td>
</tr>
</table>
</div>
### Interface 2 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has no ifSpeed property
#
# Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1:
# SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0"
# MaxBytes[192.168.178.1_sit0]: 0
# Title[192.168.178.1_sit0]: Traffic Analysis for 2 -- sit0
# PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 2 -- sit0</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>fritz.fonwlan.box in Unknown</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>root@localhost</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>sit0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>Encapsulation Interface (131)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>No Name</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>
## Interface 3 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1:
SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0"
MaxBytes[192.168.178.1_cpmac0]: 128000000
Title[192.168.178.1_cpmac0]: Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch
PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>cpmac0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>128 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1:
SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0"
MaxBytes[192.168.178.1_eth0]: 12500000
Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0
PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>eth0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 5 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_lan]: \lan:public@192.168.178.1:
SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan"
MaxBytes[192.168.178.1_lan]: 12500000
Title[192.168.178.1_lan]: Traffic Analysis for 5 -- lan (eth + wifi)
PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 5 -- lan (eth + wifi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lan </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>169.254.1.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 6 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest]: \guest:public@192.168.178.1:
SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest"
MaxBytes[192.168.178.1_guest]: 37500000
Title[192.168.178.1_guest]: Traffic Analysis for 6 -- guest (Guest WiFi)
PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 6 -- guest (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.179.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 19 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1:
SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0"
MaxBytes[192.168.178.1_wifi0]: 37500000
Title[192.168.178.1_wifi0]: Traffic Analysis for 19 -- wifi0
PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 19 -- wifi0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 20 >> Descr: 'wifi1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi1]: \wifi1:public@192.168.178.1:
SetEnv[192.168.178.1_wifi1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi1"
MaxBytes[192.168.178.1_wifi1]: 37500000
Title[192.168.178.1_wifi1]: Traffic Analysis for 20 -- wifi1
PageTop[192.168.178.1_wifi1]: <h1>Traffic Analysis for 20 -- wifi1</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1:
SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0"
MaxBytes[192.168.178.1_ath0]: 37500000
Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0
PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 26 >> Descr: 'ath1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath1]: \ath1:public@192.168.178.1:
SetEnv[192.168.178.1_ath1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath1"
MaxBytes[192.168.178.1_ath1]: 37500000
Title[192.168.178.1_ath1]: Traffic Analysis for 26 -- ath1
PageTop[192.168.178.1_ath1]: <h1>Traffic Analysis for 26 -- ath1</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1:
SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl"
MaxBytes1[192.168.178.1_dsl]: 1500000
MaxBytes2[192.168.178.1_dsl]: 128000
Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl
PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>dsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>ppp (23)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1:
SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl"
MaxBytes1[192.168.178.1_adsl]: 1500000
MaxBytes2[192.168.178.1_adsl]: 128000
Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm
PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>adsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>atm (37)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1:
SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs"
MaxBytes1[192.168.178.1_sixxs]: 1500000
MaxBytes2[192.168.178.1_sixxs]: 128000
Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs
PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>sixxs </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
# Router CPU one minute load averages
Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1:
RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.1]: 1000
Title[cpu.1]: CPU LOAD
PageTop[cpu.1]: <H1>CPU one minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>One minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.1]: avg cpu/min
Factor[cpu.1]: 0.01
YLegend[cpu.1]: CPU Utilization
Legend1[cpu.1]: CPU Utilization (Load)
Legend2[cpu.1]: CPU Utilization (Load)
Legend3[cpu.1]:
Legend4[cpu.1]:
LegendI[cpu.1]:
LegendO[cpu.1]: Usage
Options[cpu.1]: gauge, unknaszero
# Router CPU five minute load averages
Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1:
RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1:
MaxBytes[cpu.2]: 1000
Title[cpu.2]: CPU LOAD
PageTop[cpu.2]: <H1>CPU five minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Five minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.2]: avg cpu/5 min
Factor[cpu.2]: 0.01
YLegend[cpu.2]: CPU Utilization
Legend1[cpu.2]: CPU Utilization (Load)
Legend2[cpu.2]: CPU Utilization (Load)
Legend3[cpu.2]:
Legend4[cpu.2]:
LegendI[cpu.2]:
LegendO[cpu.2]: Usage
Options[cpu.2]: gauge, unknaszero
# Router CPU fifteen minute load averages
Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1:
RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.3]: 1000
Title[cpu.3]: CPU LOAD
PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Fifteen minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.3]: avg cpu/15 min
Factor[cpu.3]: 0.01
YLegend[cpu.3]: CPU Utilization
Legend1[cpu.3]: CPU Utilization (Load)
Legend2[cpu.3]: CPU Utilization (Load)
Legend3[cpu.3]:
Legend4[cpu.3]:
LegendI[cpu.3]:
LegendO[cpu.3]: Usage
Options[cpu.3]: gauge, unknaszero
# Router CPU Utilization ssCpuIdle.0
Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1:
RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.idle]: 1000
Title[cpu.idle]: CPU Utilization
PageTop[cpu.idle]: <H1>CPU Utilization</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>CPU Utilization</td>
</tr>
</table>
</div>
ShortLegend[cpu.idle]: %
YLegend[cpu.idle]: CPU Utilization
Legend1[cpu.idle]: CPU Utilization %(Load)
Legend2[cpu.idle]: CPU Utilization %(Load)
Legend3[cpu.idle]:
Legend4[cpu.idle]:
LegendI[cpu.idle]:
LegendO[cpu.idle]: Usage
Options[cpu.idle]: gauge, unknaszero
# Router Used Memory = Memory - Free Memory
# The total memory can be obtained from /proc/meminfo
# For the 7390 the MemTotal = 109168 kB
# Without Swap:
# Target[mem.used]: 109168 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1:
# With Swap enabled:
Target[mem.used]: .1.3.6.1.4.1.2021.4.5.0&.1.3.6.1.4.1.2021.4.5.0:public@192.168.178.1 - .1.3.6.1.4.1.2021.4.6.0&.1.3.6.1.4.1.2021.4.6.0:public@192.168.178.1
RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1:
MaxBytes[mem.used]: 109168
Title[mem.used]: Used Memory
PageTop[mem.used]: <H1>Used Memory</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Used Memory</td>
</tr>
</table>
</div>
ShortLegend[mem.used]: kBytes
YLegend[mem.used]: Used Memory
Legend1[mem.used]: Used Memory (Total is 109168)
Legend2[mem.used]: Used Memory (Total is 109168)
Legend3[mem.used]:
Legend4[mem.used]:
LegendI[mem.used]:
LegendO[mem.used]: Usage
Options[mem.used]: gauge, unknaszero
WorkDir: c:\Users\<user>\www\mrtg
One page overview¶
MRTG offers a tool to generate a web-page with for a specific period,
e.g. all one-day graphs of all configured targets on one page.
In a dos-box in the mrtgbin directory execute the following (replace
<name> with your prefered name for the page). For a page with one-day
graphs:
perl indexmaker —output <name>.htm mrtg.cfg
For a page with graphs of a week, month or year:
perl indexmaker —show=week —output <name>.htm mrtg.cfg perl indexmaker —show=month —output <name>.htm mrtg.cfg perl indexmaker —show=year —output <name>.htm mrtg.cfg
Then move the created .htm file to the directory with all the generated MRTG pages.
MGTG as a service¶
With a new installation on Win7 I installed I decided to install on the following locations i.s.o. the root of the c: directory:
Web-pages:
C:Users<user>wwwmrtg\
MRTG:
C:Program Files (x86)mrtg-2.17.4\
Net-SNMP:
C:Program Files (x86)Net-SNMP\
You need to obtain the following two programs to create the service:
instsrv.exe srvany.exe
Copy them to C:Program Files (x86)mrtg-2.17.4bin\ directory.
I generated a service named mrtg_7390.
cd C:\Program Files (x86)\mrtg-2.17.4\bin\
instsrv "MRTG_7390" "C:\Program Files (x86)\mrtg-2.17.4\bin\srvany.exe"
Create a registry file at the following location:
C:Program Files (x86)mrtg-2.17.4binmrtg_7390.reg
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MRTG_7390\Parameters] "Application"="c:\\Program Files\\perl64\\bin\\wperl.exe" "AppParameters"="\"c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\mrtg\" \"c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\mrtg_7390.cfg\"" "AppDirectory"="c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\"
Add the entries in the in the registry using the following command:
regedit /s mrtg_7390.reg
MRTG as a Service Registry entry
MRTG as a Service Registry entry parameters